Maxatec MD-500 Bedienungsanleitung PDF herunterladen (Seite 7)

5.3. EMULATION STAR SP200

Command Hex Code Description

BEL <07>H

Differed drive command “A” for peripheral unit

(Default setting)

CAN <18>H Cancel print data in buffer

LF <0A>H Line feed

CR <0D>H Line feed (same as LF)

SO <0E>H Select expanded character mode

SI <0F>H Cancel expanded character mode

FS <1C>H Immediate drive command “B” for peripheral unit 1

DC4 <14>H Cancel expanded character mode

ESC BEL

n1 n2

<1B>H<07>H<n1><n2>

Adjust drive pulse width for peripheral unit

(Default setting)

ESC @ <1B>H<40>H Initialize printer

ESC M <1B>H<4D>H

Select 7 x 7 (Half dots) character size

(Default setting)

ESC R n <1B>H<52>H<n> Select international character set

ESC P <1B>H<50>H Select 9 x 7 (Half dots) character size

ESC W 1

<1B>H<57>H<31>

H<1B>H<57>H<1>

Select expanded character mode

ESC W 0

<1B>H<57>H<37>

H<1B>H<57>H<0>

Cancel expanded character mode

ESC a n <1B>H<61>H<n> Feed paper n lines

6-1. Interface Connector

<D-SUB 25 Female Serial> <Centronics Parallel>

Serial Interface

PIN SIGNAL I/O DESCRIPTION

2 TXD Output Printer transmit data line RS-232C level

3 RXD Input Printer receive data line RS-232C level

4, 20 DTR Output Printer handshake to host line RS-232C level

6 DSR Input Data Send Ready

1, 7 GND - System Ground

USB Interface

PIN SIGNAL I/O DESCRIPTION

1 +5V - +5V

2 DATA- - Printer transmit data line

3 DATA+ - Printer transmit data line

4 GND - System Ground

6. Interface

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxatec MD-500 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern